川中磨溪—高石梯地区下寒武统龙王庙组层序格架内滩体的发育演化特征及对储层的控制     

王頔  胡明毅  高达  邢梦妍  汪涛  刘泠杉  王静怡 《海相油气地质》2017,22(1)

川中磨溪—高石梯地区龙王庙组可划分为两个三级层序。通过大量岩心、薄片以及测井资料综合分析,磨溪—高石梯地区龙王庙期整体属于局限台地沉积,可划分为台内滩、滩间洼地以及潟湖亚相。以台内滩颗粒含量、沉积构造以及单层滩体沉积厚度为基础,结合测井响应特征分析,将台内滩划分为滩核、滩翼以及白云岩坪等微相,并建立了台内滩的3种典型沉积序列:滩翼—滩核—白云岩坪、潟湖—滩间洼地—台内滩,以及滩间洼地—台内滩。层序格架内台内滩的纵横向发育特征表明:SQ_2时期较SQ_1时期更为发育,滩体单层厚度和总厚度均较大,层序界面附近的滩核—白云岩坪沉积序列上部为最有利的储层发育相带。  相似文献   

Lithofacies paleogeography mapping and reservoir prediction in tight sandstone strata: A case study from central Sichuan Basin,China     

Yuan Zhong  Lu Zhou  Xiucheng Tan  Chengbo Lian  Hong Liu  Jijia Liao  Guang Hu  Mingjie Liu  Jian Cao 《地学前缘(英文版)》2017,8(5):961-975

Sand-rich tight sandstone reservoirs are potential areas for oil and gas exploration. However, the high ratio of sandstone thickness to that of the strata in the formation poses many challenges and uncertainties to traditional lithofacies paleogeography mapping. Therefore, the prediction of reservoir sweet spots has remained problematic in the field of petroleum exploration. This study provides new insight into resolving this problem, based on the analyses of depositional characteristics of a typical modern sand-rich formation in a shallow braided river delta of the central Sichuan Basin, China. The varieties of sand-rich strata in the braided river delta environment include primary braided channels, secondary distributary channels and the distribution of sediments is controlled by the successive superposed strata deposited in paleogeomorphic valleys. The primary distributary channels have stronger hydrodynamic forces with higher proportions of coarse sand deposits than the secondary distributary channels. Therefore, lithofacies paleogeography mapping is controlled by the geomorphology, valley locations, and the migration of channels. We reconstructed the paleogeomorphology and valley systems that existed prior to the deposition of the Xujiahe Formation. Following this, rock-electro identification model for coarse skeletal sand bodies was constructed based on coring data. The results suggest that skeletal sand bodies in primary distributary channels occur mainly in the valleys and low-lying areas, whereas secondary distributary channels and fine deposits generally occur in the highland areas. The thickness distribution of skeletal sand bodies and lithofacies paleogeography map indicate a positive correlation in primary distributary channels and reservoir thickness. A significant correlation exists between different sedimentary facies and petrophysical properties. In addition, the degree of reservoir development in different sedimentary facies indicates that the mapping method reliably predicts the distribution of sweet spots. The application and understanding of the mapping method provide a reference for exploring tight sandstone reservoirs on a regional basis.  相似文献   

Characteristics and petroleum origin of the Carboniferous volcanic rock reservoirs in the Shixi Bulge of Junggar Basin,western China     

《Marine and Petroleum Geology》2017

Shixi Bulge of the central Junggar Basin in western China is a unique region that provides insight into the geological and geochemical characteristics of large-scale petroleum reservoirs in volcanic rocks of the western Central Asian Orogenic Belt. Carboniferous volcanic rocks in the Shixi Bulge mainly consist of striped lava and agglomerate, as well as breccia lava and tight tuff. Volcanic rocks differ in porosity and permeability. Striped lava exhibits the highest porosity (average: 14.2%) but the lowest permeability (average: 0.67 × 10⁻¹⁵ m) among the rock types. Primary gas pores are widely developed and mostly filled. Secondary dissolution pores and fractures are two major reservoir storage spaces. Capillary pressure curves suggest the existence of four pore structure types of reservoir rocks. Several factors, namely, lithology, pore structure, and various diagenesis, govern the physical properties of volcanic rocks. The oil is characterized by a high concentration of tricyclic terpane, a terpane distribution of C₂₃ < C₂₁ > C₂₀, and sterane distributions of C₂₇ < C₂₈ < C₂₉ and C₂₇ > C₂₈ < C₂₉. Oil and gas geochemistry revealed that the oil is a mixture derived primarily from P₂w source rock and secondarily from P₁j source rock in the sag west of Pen-1 Well. The gases are likely gas mixtures of humic and sapropelic organic origins, with the sapropelic gas type dominant in the mixture. The gas mixture is most likely cracked from kerogen rather than oils. The Carboniferous volcanic reservoirs in Shixi Bulge share some unique characteristics that may provide useful insights into the various roles of different volcanic reservoir types in old volcanic provinces. The presence of these reservoirs will undoubtedly encourage future petroleum exploration in volcanic rocks up to the deep parts of sedimentary basins.  相似文献   

Prediction of diagenetic facies using well logs – A case study from the upper Triassic Yanchang Formation,Ordos Basin,China     

《Marine and Petroleum Geology》2017

Understanding diagenetic heterogeneity in tight sandstone reservoirs is vital for hydrocarbon exploration. As a typical tight sandstone reservoir, the seventh unit of the Upper Triassic Yanchang Formation in the Ordos Basin (Chang 7 unit), central China, is an important oil-producing interval. Results of helium porosity and permeability and petrographic assessment from thin sections, X-ray diffraction, scanning electron microscopy and cathodoluminescence analysis demonstrate that the sandstones have encountered various diagenetic processes encompassing mechanical and chemical compaction, cementation by carbonate, quartz, clay minerals, and dissolution of feldspar and lithic fragments. The sandstones comprise silt-to medium-grained lithic arkoses to feldspathic litharenites and litharenites, which have low porosity (0.5%–13.6%, with an average of 6.8%) and low permeability (0.009 × 10⁻³ μm² to 1.818 × 10⁻³ μm², with an average of 0.106 × 10⁻³ μm²).This study suggests that diagenetic facies identified from petrographic observations can be up-scaled by correlation with wire-line log responses, which can facilitate prediction of reservoir quality at a field-scale. Four diagenetic facies are determined based on petrographic features including intensity of compaction, cement types and amounts, and degree of dissolution. Unstable and labile components of sandstones can be identified by low bulk density and low gamma ray log values, and those sandstones show the highest reservoir quality. Tightly compacted sandstones/siltstones, which tend to have high gamma ray readings and relatively high bulk density values, show the poorest reservoir quality. A model based on principal component analysis (PCA) is built and show better prediction of diagenetic facies than biplots of well logs. The model is validated by blind testing log-predicted diagenetic facies against petrographic features from core samples of the Upper Triassic Yanchang Formation in the Ordos Basin, which indicates it is a helpful predictive model.  相似文献   

Breaching-related turbidites in fluvial and estuarine channels: Examples from outcrop and core and implications to reservoir models     

《Marine and Petroleum Geology》2017

An understanding of the paleoenvironment and the main sedimentary processes behind preserved deposits is crucial to correctly interpret and represent lithofacies and facies associations in geomodels that are used in the hydrocarbon industry, particularly when a limited dataset of cores is available. In this paper a fairly common facies association is discussed containing massive sands - here defined as thick (>0.5 m) structureless sand beds devoid of primary sedimentary structures, or with some faint lamination - deposited by mass failures of channel banks in deep fluvial and estuarine channels. Amongst geologists it is generally accepted that liquefaction is the main trigger of large bank failures in sandy subaqueous slopes. However, evidence is mounting that for sand deposits a slow, retrogressive failure mechanism of a steep subaqueous slope, known as breaching, is the dominant process. A model of breaching-induced turbidity current erosion and sedimentation is presented that explains the presence of sheet-like massive sands and channel-like massive sands and the sedimentary structures of the related deposits. Sheet-like packages of spaced planar lamination that are found together with massive sand bodies in deposits of these environments are identified as proximal depositional elements of breach failure events. The model, acquired from sedimentary structures in deposits in the Eocene estuarine Vlierzele Sands, Belgium, is applied to outcrops of the Dinantian fluvial Fell Sandstone, England, and cores of the Tilje and Nansen fms (Lower Jurassic, Norwegian Continental Shelf). The possible breach failure origin of some other massive sands described in literature from various ancient shallow water environments is discussed. Breach failure generated massive sands possibly also form in deep marine settings. The potentially thick and homogeneous, well-sorted sand deposits bear good properties for hydrocarbon flow when found in such an environment. However, in case of deposition in an estuarine or fluvial channel, these sand bodies are spatially constricted and careful facies interpretation is key to identifying this. When constructing a static reservoir model, this needs to be considered both for in-place volume calculations as well as drainage strategies.  相似文献   

Kilometer-scale fault-related thermal anomalies in tight gas sandstones     

《Marine and Petroleum Geology》2017

Upper Carboniferous sandstones make one of the most important tight gas reservoirs in Central Europe. This study integrates a variety of geothermometers (chlorite thermometry, fluid inclusion microthermometry and vitrinite reflection measurements) to characterize a thermal anomaly in a reservoir outcrop analog (Piesberg quarry, Lower Saxony Basin), which is assumed responsible for high temperatures of circa 300 °C, deteriorating reservoir quality entirely. The tight gas siliciclastics were overprinted with temperatures approximately 90–120 °C higher compared to outcropping rocks of a similar stratigraphic position some 15 km to the west. The local temperature increase can be explained by circulating hydrothermal fluids along the fault damage zone of a large NNW-SSE striking fault with a displacement of up to 600 m in the east of the quarry, laterally heating up the entire exposed tight gas sandstones. The km-scale lateral extent of this fault-bound thermal anomaly is evidenced by vitrinite reflectance measurements of meta-anthracite coals (VR_rot ∼ 4.66) and the temperature-related diagenetic overprint. Data suggest that this thermal event and the associated highest coalification was reached prior to peak subsidence during Late Jurassic rifting (162 Ma) based on K-Ar dating of the <2 μm fraction of the tight gas sandstones. Associated stable isotope data from fluid inclusions, hosted in a first fracture filling quartz generation (T ∼ 250 °C) close to lithostatic fluid pressure (P ∼ 1000 bars), together with authigenic chlorite growth in mineralized extension fractures, demonstrate that coalification was not subject to significant changes during ongoing burial. This is further evidenced by the biaxial reflectance anisotropy of meta-anthracite coals. A second event of quartz vein formation occurred at lower temperatures (T ∼ 180 °C) and lower (hydrostatic) pressure conditions (P ∼ 400 bars) and can be related to basin inversion. This second quartz generation might be associated with a second event of illite growth and K-Ar ages of 96.5–106.7 Ma derived from the <0.2 μm fraction of the tight gas sandstones.This study demonstrates the exploration risk of fault-bound thermal anomalies by deteriorating entirely the reservoir quality of tight gas sandstones with respect to porosity and permeability due to the cementation with temperature-related authigenic cements. It documents that peak temperatures are not necessarily associated with peak subsidence. Consequently, these phenomena need to be considered in petroleum system models to avoid, for example, overestimates of burial depth and reservoir quality.  相似文献   

High-resolution sequence stratigraphy,sedimentology and reservoir quality evaluation of the Yaojia Formation in the Longxi area of the Western Slope,Songliao Basin,China     

《Marine and Petroleum Geology》2017

Delta-front sand bodies with large remaining hydrocarbon reserves are widespread in the Upper Cretaceous Yaojia Formation in the Longxi area of the Western Slope, Songliao Basin, China. High-resolution sequence stratigraphy and sedimentology are performed based on core observations, well logs, and seismic profile interpretations. An evaluation of the reservoir quality of the Yaojia Formation is critical for further petroleum exploration and development. The Yaojia Formation is interpreted as a third-order sequence, comprising a transgressive systems tract (TST) and a regressive systems tract (RST), which spans 4.5 Myr during the Late Cretaceous. Within this third-order sequence, nine fourth-order sequences (FS9–FS1) are recognized. The average duration of a fourth-order sequence is approximately 0.5 Myr. The TST (FS9–FS5) mostly comprises subaqueous distributary channel fills, mouth bars, and distal bars, which pass upward into shallow-lake facies of the TST top (FS5). The RST (FS4–FS1) mainly contains subaqueous distributary-channel and interdistributary-bay deposits. Based on thin-sections, X-ray diffraction (XRD), scanning electron microscope (SEM) and high-pressure mercury-intrusion (HPMI) analyses, a petrographic study is conducted to explore the impact of the sedimentary cyclicity and facies changes on reservoir quality. The Yaojia sandstones are mainly composed of lithic arkoses and feldspathic litharenites. The sandstone cements mostly include calcite, illite, chlorite, and secondary quartz, occurring as grain coating or filling pores. The Yaojia sandstones have average core plug porosity of 18.55% and permeability of 100.77 × 10⁻³ μm², which results from abundant intergranular pores and dissolved pores with good connectivity. Due to the relatively coarser sediments and abundant dissolved pores in the feldspars, the FS4–FS1 sandstones have better reservoir quality than the FS9–FS5 sandstones, developing relatively higher porosity and permeability, especially the FS1 and FS2 sandstones. The source–reservoir–cap-rock assemblages were formed with the adjoining semi-deep lake mudstones that were developed in the Nenjiang and Qingshankou Formations. This study reveals the deposition and distribution of the delta-front sand bodies of the Yaojia Formation within a sequence stratigraphic framework as well as the factors controlling the Yaojia sandstones reservoir quality. The research is of great significance for the further exploration of the Yaojia Formation in the Longxi area, as well as in other similar lacustrine contexts.  相似文献   

Reservoir origin and characterization of gas pools in intrusive rocks of the Yingcheng Formation,Songliao Basin,NE China     

《Marine and Petroleum Geology》2017

In 2013, the first discovery of gas pools in well LS 208 in intrusive rocks of the Songliao Basin (SB), NE China was made in the 2nd member of the Yingcheng Formation in the Yingtai rift depression, proving that intrusive rocks of the SB have the potential for gas exploration. However, the mechanisms behind the origin of reservoirs in intrusive rocks need to be identified for effective gas exploration. The gas pool in intrusive rocks can be characterized as a low-abundance, high-temperature, normal-pressure, methane-rich, and lithologic pool based on integrated coring, logging, seismic, and oil test methods. The intrusive rocks show primary and secondary porosities, such as shrinkage fractures (SF), spongy pores (SP), secondary sieve pores (SSP), and tectonic fractures (TF). The reservoir is of the fracture–pore type with low porosity and permeability. A capillary pressure curve for mercury intrusion indicates small pore-throat size, negative skewness, medium–high displacement pressure, and middle–low mercury saturation. The development of fractures was found to be related to the quenching effects of emplacement and tectonic inversion during the middle–late Campanian. SP and SSP formed during two phases. The first phase occurred during emplacement of the intrusive rock in the late Albian, when the intrusions underwent alteration by organic acids. The second phase occurred between the early Cenomanian and middle Campanian, when the intrusions underwent alteration by carbonic acid. The SF formed prior to oil charging, the SSP + SP formed during oil charging, and the TF formed during the middle–late Campanian and promoted the distribution of gas pools throughout the reservoir. The intrusive rocks in the SB and the adjacent basins were emplaced in the mudstone and coal units, and have great potential for gas exploration.  相似文献   

Palynofacies classification of submarine fan depositional environments: Outcrop examples from the Marnoso-Arenacea Formation,Italy     

《Marine and Petroleum Geology》2017

Basin floor fans contain some of the largest deep-water hydrocarbon accumulations discovered, however they also demonstrate extremely complex stratigraphic architecture, understanding of which is crucial for maximum recovery. Here we develop a new method, based upon palynofacies analysis, for the distinction of the different depositional environments that are commonly associated with basin floor fans. Previous studies and our sedimentological analysis allow good confidence in the discrimination of the different depositional environments of the outcropping Marnoso-Arenacea Formation fan system. One hundred and thirty-five samples were collected from mudstones in conjunction with sedimentary logging of 871 m of outcrops. Six lithofacies associations are described and interpreted to represent lobe axis, lobe fringe, fan fringe, contained interlobe, basin plain, and starved high depositional sub-environments. Palynofacies of these elements demonstrate turbidites to be rich in terrestrial organic matter, with sixteen categories of matter recognised. The abundances and proportions of particles varies between sub-environments, with lobe axis deposits containing the largest, densest particles, with a transition to ever smaller and lighter particles moving toward the basin plain. Fuzzy C-means statistical analysis was used to explore this trend. Distribution of organic matter is not random, but is dominated by hydrodynamic sorting and sequential fall-out of particles as turbidity currents passed across the basin. This allows a palynofacies classification scheme to be constructed to assist the identification of depositional environments of submarine fans, which may be combined with subsurface data to assist reservoir characterisation.  相似文献   

New insights into the carbonate karstic fault system and reservoir formation in the Southern Tahe area of the Tarim Basin     

《Marine and Petroleum Geology》2017

As worldwide hydrocarbon exploration has extended from shallowly to deeply buried strata, reservoir quality has attracted substantial and persistent interest in petroleum geology. In particular, deeply buried strata (>5500 m) in the Tarim Basin have attracted considerable attention because carbonate reservoirs that have experienced fracture or dissolution have also been shown to demonstrate considerable hydrocarbon potential. Therefore, it is necessary to determine how these reservoirs are developed and distributed in detail from both scientific and practical standpoints.In this paper, we address this issue using a case study in the southern Tahe area, which is contained within the largest Palaeozoic marine oilfield in China. In the northern Tahe area, mega-paleokarst systems developed in the Ordovician strata; however, the reservoir quality in the southern part of the Tahe area is relatively poor because it is covered by insoluble formations during karstification. Observations of cores and analyses of images of well logging demonstrate that these reservoirs are dominated by caves, vugs and fractures that have developed near faults. We speculate that the faults penetrating insoluble formations represent the main dissolution passages that originally developed these karstic fault systems. Additionally, we analyse a series of outcrops, seismic data, and structures to characterize the spatial geometry of these major faults and their surrounding fractures in detail. Most of these are strike-slip faults, and their subsequent reservoirs can be divided into three categories based on their development, including dendritic, sandwich and slab reservoirs. Recent studies demonstrate that karstic fault reservoirs are most common traps in the study area. Although various types of carbonate karstic fault reservoirs are represented in this region, the dendritic karstic fault reservoir is the most hydrocarbon-rich.Guided by these initial results, 108 wells were drilled from 2013 to 2014, producing 485 thousand tons of oil and yielding success ratios greater than 89%. The average production of dendritic reservoirs is 37.4 tons per day (t/d), while those of sandwich and slab types are 20.2 t/d and 14.0 t/d, respectively. These results represent significant references for future hydrocarbon exploration and the development of similar deeply buried karstic fault reservoirs in the Tarim Basin and elsewhere.  相似文献